Arrow Components

PowerPoint field tips feature a pure steel design with a rugged black zinc coating. These field tips weigh 100 grains and come in a pack of 12.

PowerPoint field tips feature a pure steel design with a rugged black zinc coating. These field tips weigh 100 grains and come in a pack of 12.

One of the easiest ways to add weight to your arrow to increase penetration without affecting arrow spine. Slide inside your carbon arrow shaft and trim to fit. No glue needed. 12 pack.

The R.O.C. System was designed to strengthen micro-diameter arrows for better penetration and performance upon impact. Extensive testing found micro-diameters excel in flight, but categorically fail in penetration and impact. Poorly engineered outserts add stress to arrow walls and tips, ultimately causing failures. The R.O.C. System addresses these issues with a patented shock-absorbing and energy-transferring design that maintains accuracy and maximizes impact.

Standard diameter press fit nock designed for use with D-loops. Double lock throat for added secureity and a clean release.

The "F" nock is a small, press fit nock designed for shooters that shoot with a "D" loop on the string. Made of durable impact resistant polycarbonate. Double lock throat for added security and a clean release.

Pin nocks designed for use with any pin nock adaptor. Smooth throat provides a clean release.

Pin nocks designed for use with any pin nock adaptor. Smooth throat provides a clean release.

Pin nocks designed for use with any pin nock adaptor. Smooth throat provides a clean release.

Small diameter break off parabolic points feature two detachable 10 grain weight sections. A tight fit along the full length of the point shank ensures great alignment while evenly spaced grooves hold the appropriate amount of adhesive needed to keep your points securely in place.

Stainless steel screw-in bullet points feature an oversized contour that is slightly larger than the shaft for added protection during target entry, while 1/64" size increments result in a flush fit between shaft and point for smooth arrow removal. Each point size and weight has a unique profile to achieve superior aerodynamic flight. Critical tolerances are held to the highest standards to ensure maximum consistency and concentricity.

Stainless steel screw-in bullet points feature an oversized contour that is slightly larger than the shaft for added protection during target entry, while 1/64" size increments result in a flush fit between shaft and point for smooth arrow removal. Each point size and weight has a unique profile to achieve superior aerodynamic flight. Critical tolerances are held to the highest standards to ensure maximum consistency and concentricity.

Stainless steel screw-in bullet points feature an oversized contour that is slightly larger than the shaft for added protection during target entry, while 1/64" size increments result in a flush fit between shaft and point for smooth arrow removal. Each point size and weight has a unique profile to achieve superior aerodynamic flight. Critical tolerances are held to the highest standards to ensure maximum consistency and concentricity.

Stainless steel screw-in bullet points feature an oversized contour that is slightly larger than the shaft for added protection during target entry, while 1/64" size increments result in a flush fit between shaft and point for smooth arrow removal. Each point size and weight has a unique profile to achieve superior aerodynamic flight. Critical tolerances are held to the highest standards to ensure maximum consistency and concentricity.

Stainless steel screw-in bullet points feature an oversized contour that is slightly larger than the shaft for added protection during target entry, while 1/64" size increments result in a flush fit between shaft and point for smooth arrow removal. Each point size and weight has a unique profile to achieve superior aerodynamic flight. Critical tolerances are held to the highest standards to ensure maximum consistency and concentricity.

Stainless steel screw-in bullet points feature an oversized contour that is slightly larger than the shaft for added protection during target entry, while 1/64" size increments result in a flush fit between shaft and point for smooth arrow removal. Each point size and weight has a unique profile to achieve superior aerodynamic flight. Critical tolerances are held to the highest standards to ensure maximum consistency and concentricity.

Glue in brass inserts for standard diameter Carbon Express arrows. Allows for use of any standard screw in point or broadhead. Available in 50 and 100 grain. 12 per pack.

Glue in brass inserts for standard diameter Carbon Express arrows. Allows for use of any standard screw in point or broadhead. Available in 50 and 100 grain. 12 per pack.

Carbon Express Half-Out Insert .203 designed for smaller diameter shafts which not only provides a great fit for most points, it also gives you the added weight forward most archers desire.

Aluminum point insert for Carbon Express standard diameter arrow shafts.

Aluminum point insert for Carbon Express standard diameter arrow shafts.

Aluminum point insert for Carbon Express standard diameter arrow shafts.

Aluminum point insert for Carbon Express standard diameter arrow shafts.

Precision nocks made for the Carbon Express Predator XSD .166" ID arrows.

Features precise contact points for controlled arrow release and an aligned nock barrel for true arrow flight. Fits all standard diameter Carbon Express shafts.

Nock bushings for Tank23D shafts.

Nock bushings for Tank27 shafts.

BullDog nock collars provide added strength and durability to the nock end of the shaft. Helps prevent cracks from nock end impacts.

Pin nock adapters for Tank23D shafts.

Cone shaped point designed to help eliminate deflections in hard targets. Steel construction inner chamber is tapped to accept screw point weights.

Cone shaped point designed to help eliminate deflections in hard targets. Steel construction inner chamber is tapped to accept screw point weights.

Screw in parabolic point weights allow the shooter to customize their FOC.

Screw in parabolic point weights allow the shooter to customize their FOC.

Allows the shooter to easily change weights by simply removing the nock. Works on all standard Carbon Express threaded weights.

Half-out inserts for Carbon Express Triad arrow shafts. These 97 grain inserts have a .166� diameter. 12 per package.

Half out insert made for the Carbon Express Predator XSD arrow. Fits all standard thread field points and broadheads. Size 1 fits 300-350 spine shafts, Size 2 fits 400-500 spine shafts. Weight: 33 gr.

Built for Easton .244 ID carbon arrow shafts. Add additional F.O.C. for optimal arrow flight. Features break-off for either 75 or 50 grains of weight.

Screw in 19/64 points.

Easton’s 4mm Aluminum Half-Out Aluminum inserts enable the use of common 8-32 thread broadheads in 4mm Full Metal Jacket and 4mm Carbon Injexion shafts. Precision machined from aluminum, this half-out delivers high strength-to-weight ratio. The package contains one dozen (12) 35 grain half-out inserts.

Easton’s 4mm Aluminum Half-Out Aluminum inserts enable the use of common 8-32 thread broadheads in 4mm Full Metal Jacket and 4mm Carbon Injexion shafts. Precision machined from aluminum, this half-out delivers high strength-to-weight ratio. The package contains one dozen (12) 35 grain half-out inserts.

Super-strong titanium half-out system that solves the desire of bowhunters who want to use regular 8-32 broad heads in micro diameter arrows. Precision machined from TI–6 series high-strength titanium for high strength-to-weight ratio, providing a better tune with your preferred arrow shaft than overly heavy steel half-outs, and superior durability over aluminum half-outs. Features Easton’s HP high-precision alignment technology for unsurpassed broadhead alignment and concentricity.

Precision molded press fit nock. Fits "G" UNI bushings and any other shafts that accept "G" nocks.

Precision molded press fit nock. Fits "G" UNI bushings and any other shafts that accept "G" nocks.

Precision molded press fit nock. Fits "G" UNI bushings and any other shafts that accept "G" nocks.

Precision molded press fit nock. Fits "G" UNI bushings and any other shafts that accept "G" nocks.

Precision molded press fit nock. Fits "G" UNI bushings and any other shafts that accept "G" nocks.

.166" inside diameter glue in target point

.166" inside diameter glue in target point

Replacement nock for Easton arrow shafts that use Deep Six components.

Replacement nock for Easton arrow shafts that use Deep Six components.

Replacement nock for Easton arrow shafts that use Deep Six components.

For use with Easton 4MM arrows shafts. Break-off shank will fit arrows with .166" ID.

Stainless steel adjustable weight glue in target points for Easton carbon One shafts.

Pin nock adapter for Easton A/C/E arrow shafts. Allows use of pin nocks and protects the back of the arrow shaft.

Pin bushing for Easton Carbon One shafts (Sizes 410-500).

Easton's 4mm Half-Out Insert is a convenient insert option compatible with any Easton 4mm arrow shaft.  The stainless steel version  delivers increased FOC versus the titanium version.

Easton's 4mm Half-Out Insert is a convenient insert option compatible with any Easton 4mm arrow shaft.  The stainless steel version  delivers increased FOC versus the titanium version.

Glue-in application ensures point stays in place even in tough target faces

Easton's 5mm Half-Out Insert is convenient insert option. Compatible with any Easton 5mm arrow shafts. Available in aluminum or stainless steel.