Cart is empty
Cajun
1 products
Fin-Finder
11 products
Innerloc
6 products
Muzzy
3 products
RPM Bowfishing
1 products
TruGlo
1 products
The Sting-A-Ree Tournament point features the original reversible point, instant fish removal without touching the fish and a JackHammer replaceable tip. Penetrates deeply and grabs tight. |
Bowfishing point featuring one piece stainless steel construction and Hydro-Lok retainer bushing to keep your point tight. Simply loosen the point to remove fish. Fits 5/16" diameter bowfishing shafts. |
Bowfishing point featuring two piece stainless steel construction and Hydro-Lok retainer bushing to keep your point tight. Simply loosen the head from the ferrule to remove fish. Fits 5/16" diameter bowfishing shafts. |
Replacement tips for use on Big-Head bowfishing points. Two tips per pack. |
Bowfishing point featuring two piece stainless steel construction and Hydro-Lok retainer bushing to keep your point tight. Additional barb provides extra holding power for larger fish. Simply loosen the head from the ferrule to remove fish. Fits 5/16" diameter bowfishing shafts. |
Replacement tips for the Big-Head Pro and Kraken series bowfishing points. |
The Kraken 3 Barb Point features mechanical barbs leaving a small entry hole for increased holding power. Constructed with stainless steel and two blue rubber o-rings to eliminate tip loosening. Fits arrow shafts with a 5/16� diameter. |
Bowfishing point featuring one piece stainless steel construction and Hydro-Lok retainer bushing to keep your point tight. Simply loosen the point to remove fish. Fits 5/16" diameter bowfishing shafts. |
Bowfishing point featuring two piece stainless steel construction and Hydro-Lok retainer bushing to keep your point tight. Simply loosen the head from the ferrule to remove fish. Fits 5/16" diameter bowfishing shafts. |
Replacement tips for the Riptide V2 and Riptide Pro V2 bowfishing point. |
The Kraken Point features mechanical barbs for maximum effectiveness. Mechanical barbs minimize drag and increase penetration. 2.75� barbs deploy upon strike leaving a small entry hole for maximum effectiveness and ultimate holding power. Stainless steel construction. |
Entry level bowfishing point. Loosen tip to remove fish. Fits 5/16" diameter bowfishing shafts. |
2 Barb Grapple points penetrate freely and supply large holding area. Made of heat tempered stainless steel and feature anti vibration tips. |
Bow fishing point that has 3 blades that when in the closed position are the size of a penny, which enhances penetration and minimizes planning after entering the water. In the open position they have a 2 3/4" diameter. |
Hinged barbs on the Grapple point fold into the point body and keep the entry hole small. The point has an extra hole in the center so it can be tied directly to the bowfishing line and used with a break away system. Made of heat tempered stainless steel and feature anti vibration tips. Fits 5/16� shafts. |
Bowfishing point that brings a new level of convenience and speedy fish removal. A control stud that extends out of the back of the tip engages the barbs selecting a shooting position or a new barb extracted mode. All you need to do to switch between modes is loosen or tighten the tip. Grapid’s patent pending design allows for the tip to be removed and barbs fold forward for an alternate method of fish removal. An anti-vibration sleeve inside of the tip keeps the tip secure during the toughest days on the water. |
Replacement tips for all Grapple and Gripper series points. |
Innerloc’s Pro-Point features patented improvements that include a removable/replaceable wire barb and a vibration dampening friction O-ring and alignment pin that keeps the tip from vibrating loose. The wire barbs are contour bent to lay closer to the point’s stream-lined body for better penetration and improved holding power. Fast, pivot release requires only 1 1/2 turns of the tip. |
The Muzzy Big Fish Point Adapter allows you to turn any Muzzy Fish Point or any fish point with 1/4 28 tip threads into a Big Fish Point. Fits between the fish body and tip to provide a second set of Barbs that provide Maximum holding power. In 2 simple turns of the point and 2 turns of the adapter the barbs reverse to allow super fast and easy fish removal. |
Muzzy Bowfishing Replacement Tips are an easy to use replacement tip that will work with any Muzzy Bowfishing Fish Point that has a screw on tip and most other fish points. They are made of hardened stainless steel that has been cold-quenched to stand up to tough shooting conditions. The Gar Tip is a 3 sided tip designed for all the soft-fleshed fish. |
Screws on to any Muzzy point with a replaceable tip. Specifically designed for proper penetration on soft fleshed fish such as carp and suckers. |
The RPM Turbo point has three serrated gripper barbs, dual friction rings, all stainless construction and quick ferrule release. |
The Spring Fisher bowfishing point features a spring locking barb that holds fish firmly during retrieval and allows quick release without unscrewing the tip. Constructed of premium grade hardened stainless steel. |
BowhuntingOutlet is one of the largest archery warehouses in the world. If you are looking for Discount Bowhunting supplies, Archery equipment or Hunting gear, you've found the right place. With near wholesale prices on archery and bowhunting supplies, you'll love our selection and fast shipping.
If you are a registered customer at eders.com, your username and password will work here at BowhuntingOutlet.
BowhuntingOutlet is also Proud to Announce that Members of the Professional Bowhunter Club will receive additional discounts here at the BowhuntingOutlet!