Crossbow Bolts

Micro Diameter .166" all carbon arrow with custom aluminum nock and special build Outsert for added strength. 3 crossbow arrow package includes three special designed aluminum red lighted nocks that can be seen from the back in flight and from the side.

Three special designed aluminum green lighted nocks that can be seen from the back in flight and from the side. Nock fits the AXE .166 crossbow arrows.

Specifically designed to deliver superior performance with Barnett crossbows requiring an 18" bolt. Includes moon nocks, inserts, and 100 gr. points. Factory fletched with 4" vanes.

Carbon crossbow bolts made for superior performance. Length: 22". Includes moon nocks, inserts, and field points. Fletched with 3" vanes.

22" carbon crossbow arrows with multicolor strobing light nocks

The Hyperflight Crossbow bolts are Barnetts revolutionary small diameter bolt designed specifically for use with Hyper series crossbows. The power and speed of a crossbow combined with the precision and penetration of a .204 arrow deliver hits like you have never seen before. Straightness tolerance: .001�. 17.9% front of center for maximum downrange accuracy (with 100 grain field point). Small diameter arrow increases penetration by up to 62% compared to regular crossbow.

Bear X Desire Mini Crossbow Bolts are engineered for top-of-the-line speed, extreme accuracy, and dependability. Each bolt shaft is constructed of aluminum with a screw-in field point. These mini crossbow bolts are compatible with the Bear X Desire and Bear X Desire RD pistol crossbows.

Featuring TrueX Nock Technology, the Bear X TrueX Crossbow Arrows are designed for crossbow hunters who demand the highest quality, speed, and accuracy from their equipment. Each 6-pack of TrueX Crossbow Arrows come fully equipped with 100 grain field points, inserts, and TrueX nocks for consistent and accurate arrow flight shot after shot. Every TrueX Crossbow Arrow is inspected and sorted for straightness within +/-.005�, fletched with 4� vanes.

The D-Stroyer 380 is the lightest and fastest bolt in the Carbon Express lineup. It provides Dual Spine Weight Forward Technology for ultimate down-range accuracy plus BuffTuff exterior on the front 2/3rds that adds superior strength and consistency. Maximize the most speed and accuracy out of your crossbow with the D-Stroyer 380 Crossbolt.

Premium grade 100% carbon crossbow bolt. Constructed using Dual Spine Weight Forward technology for rapid recovery and guidance control. Patented BuffTuff Plus carbon weave construction provides strength and durability. BuffTuff carbon arrow finish with Mossy Oak Treestand pattern. Straightness: ± .0025". Fletched with 3" vanes, includes moon nock. Weight: 390 grains with 100 grain field point.

Engineered with advanced carbon materials to provide superior spine consistency and deliver the ultimate combination of speed, accuracy, and penetration. Factory fletched with 3" vanes. 20" bolts weigh 420 grains and 22" bolts weigh 449 grains (with 100 gr. point). Inserts and moon nocks installed, includes flat nocks.

Designed for the hunter who wants ultimate penetration, this is the heaviest carbon bolt in the Carbon express lineup. Factory fletched with 4" vanes. 20" bolts weigh 442 grains and 22" bolts weigh 479 grains (with 100 gr. point). Moon nocks and inserts installed, flat nocks included.

The CP400 carbon arrows are designed exclusively for the CP400. The arrows are high performance carbon shafts with 2� vanes and half-moon nocks assembled. Includes six 100 grain field tips.

CP400 select carbon arrows with lighted nocks. Each 20-inch arrow shaft is made of 100% carbon fiber with a .346 inch OD and .300in ID, hand fletched with 21in vanes and fineshed with 80gr lead free brass inserts.

Each 20" arrow shaft is made of 100% carbon fiber with a .344" OD and a .300" ID, hand fletched with 3" shield-cut Bohning X vanes and finished with 110 grain lead-free brass inserts. Top it all off with lighted half-moon nocks optimized for CenterPoint Archery crossbows. The total weight of each arrow is 345 grains, ideal for target and hunting sports and comes with an ICE coating for improved penetration and easier removal from foam targets. Perfect for practice or 3D competitions.

Bowstring activated lighted nock features an easy off design that requires no tools. Lightweight and durable, the super bright LED helps see shot placement and recover your arrow.

9mm Bolt Insert, dozen pack.

The Easton 9mm Bolt is built for strength and universal componentry. The 9mm Bolt has an inside diameter of 0.300? and will fit universal bolt components.

The Easton 9mm Bolt is built for strength and universal componentry. The 9mm Bolt has an inside diameter of 0.300? and will fit universal bolt components.

The Easton 9mm Bolt is built for strength and universal componentry. The 9mm Bolt has an inside diameter of 0.300? and will fit universal bolt components.

The Easton 9mm Bolt is built for strength and universal componentry. The 9mm Bolt has an inside diameter of 0.300? and will fit universal bolt components.

The Easton 9mm Bolt is built for strength and universal componentry. The 9mm Bolt has an inside diameter of 0.300? and will fit universal bolt components.

The Easton 9mm Bolt is built for strength and universal componentry. The 9mm Bolt has an inside diameter of 0.300? and will fit universal bolt components.

Easton’s 9mm Bolt is constructed from high-strength carbon and has an inside diameter of .300�. These bolts fit universal bolt components and come with factory installed, aluminum inserts and halfmoon nocks.

The Easton 9mm Bolt is built for strength and universal componentry. The 9mm Bolt has an inside diameter of 0.300? and will fit universal bolt components.

These flatback nocks are for use with Easton’s new 9mm bolt and crossbow bolts with .300" ID. Each nock weighs 9 grains.

These flatback nocks are for use with Easton’s new 9mm bolt and crossbow bolts with .300" ID. Each nock weighs 9 grains.

These halfmoon nocks are for use with Easton’s new 9mm bolt and crossbow bolts with .300" ID. Each nock weighs 9 grains.

Flat nocks for aluminum crossbow bolts.

Get the dependability of the XX75 series in a crossbow bolt.

Get the dependability of the XX75 series in a crossbow bolt.

Carbon bolts designed specifically for Excalibur crossbow to ensure the best possible accuracy while using both fixed and mechanical broadheads. Come equipped with Burt Coyote Lumenok lighted nocks. Available in 20� length only. Weight: 270 gr. (without point).

Specifically designed for use with the Excalibur Matrix series crossbows. Spined for blistering speed, they have a heavier front insert to increase front of center weight for unparalleled accuracy. Features a flatback insert which gives you more consistent contact with the string. Includes front and rear inserts. Length: 18", Weight: 250 gr. (without point). Factory fletched with 2" vanes.

Crossbow field points designed to fit bolts with 22/64" outside diameter.

Constructed using the highest quality carbon fiber with .001� straightness and +/- 1 grain weight tolerances, the ProFlight Arrows will ensure repeatable accuracy which is everything for confidence and success.

Constructed using the highest quality carbon fiber with .001� straightness and +/- 1 grain weight tolerances, the ProFlight Arrows will ensure repeatable accuracy which is everything for confidence and success.

Constructed using the highest quality carbon fiber with .001� straightness and +/- 1 grain weight tolerances, the ProFlight Arrows will ensure repeatable accuracy which is everything for confidence and success.

Specifically designed for use with Excalibur Micro Series crossbows. They are 16.5 inches long and feature 2-inch offset vanes. Outside Diameter.347�, Inside Diameter .3015�, Weigh 9.9 GPI, Total arrow weight 163.4gr.

Carbon bolts built to a weight between the Swift and Nitro to offer crossbow shooters another option for optimal performance. Straightness tolerance of +-.005� and weight tolerance of +-2 grains. Available in 20� or 22� lengths. Shafts are 8.5 GPI. Includes brass inserts, moon nocks, and flat nocks.

Carbon bolts built to a weight between the Swift and Nitro to offer crossbow shooters another option for optimal performance. Straightness tolerance of +-.005� and weight tolerance of +-2 grains. Available in 20� or 22� lengths. Shafts are 8.5 GPI. Includes brass inserts, moon nocks, and flat nocks. Factory fletched with 4 in. vanes. Finished weight of 418 gr. (20") or 435 gr. (22") with 100 gr. point.

Pro version of the Gold Tip Ballistic bolt features a straightness tolerance of +-.001� and weight tolerance of +-0.5 grains. Shafts weigh 8.5 GPI. Available in 22� length only. Includes brass inserts (loose), moon nocks, and flat nocks.

Brass insert for Gold Tip Swift and Ballistic crossbow bolts.

A heavier weight and stiffer spine make this bolt perfectly suited for high draw weight, high speed bows. Features a straightness tolerance of +-.005� and a weight tolerance of +- 2 grains. Shafts weight 13.9 GPI. Available in 20� and 22� lengths. Includes brass inserts and aluminum nocks. Factory fletched with 4 in. vanes. Finished weight of 490 gr. (20") or 518 gr. (22") with 100 gr. point.

Pro version of the Nitro bolt features a straightness tolerance of +-.001� and weight tolerance of +-.05 grains. Shafts weigh 13.9 GPI. Available in 22� length only. Includes aluminum nocks and brass inserts (loose). Factory fletched with 3.5 in. vanes. Finished weight of 514 gr. with 100 gr. point.

Designed with high modulus carbon and a super-stiff spine, the Superfly Pro is designed for long-range accuracy for crossbows shooting over 350 fps.

Designed with high modulus carbon and a super-stiff spine, the Superfly Pro is designed for long-range accuracy for crossbows shooting over 350 fps.

Designed with high modulus carbon and a super-stiff spine, the Superfly Pro is designed for long-range accuracy for crossbows shooting over 350 fps.

Gold Tip’s most popular bolt choice offers unmatched straightness tolerances and superb accuracy. Straightness tolerance of +-.005� and weight tolerance of +-2 grains. Available in 20� and 22� lengths. Shafts are 7.3 GPI. Includes brass inserts, moon nocks, and flat nocks.

Gold Tip’s most popular bolt choice offers unmatched straightness tolerances and superb accuracy. Straightness tolerance of +-.005� and weight tolerance of +-2 grains. Available in 20� and 22� lengths. Shafts are 7.3 GPI. Includes brass inserts, moon nocks, and flat nocks. Factory fletched with 4 in. vanes. Finished weight of 398 gr. (20") or 413 gr. (22") with 100 gr. point.

Gold Tip’s most popular bolt choice offers unmatched straightness tolerances and superb accuracy. Straightness tolerance of +-.005� and weight tolerance of +-2 grains. Available in 20� and 22� lengths. Shafts are 7.3 GPI. Includes brass inserts, moon nocks, and flat nocks. Factory fletched with 4 in. vanes. Finished weight of 398 gr. (20") or 413 gr. (22") with 100 gr. point.

Lighted crossbow nocks that have a plunger to activate and a hole on the side to turn off. Fits bolt size .297 to .302 I.D. Weigh 30 grains each.

Lighted crossbow nocks that have a plunger to activate and a hole on the side to turn off. Fits bolt size .297 to .302 I.D. Weigh 30 grains each.

The heavy weight of the HYPR Crossbow bolt delivers maximum penetration to crush big game with hard hitting kinetic energy and devastating knock-down power. Advanced Carbon Construction creates spine consistency for greater accuracy, exceptional reliability and repeat performance. Precision sorted for straightness to +/- 0.003" for maximum consistency.

The heavy weight of the HYPRâ„¢ SWATâ„¢ Crossbow Bolt delivers maximum penetration to crush big game with hard hitting kinetic energy and devastating knock-down power. Advanced carbon construction creates spine consistency for greater accuracy, exceptional reliability and repeat performance.

Shoot faster than ever before! The High Velocity HYPR™ Lite bolts are engineered specifically to maximize the speed delivered by today’s high-powered crossbows. Advanced Carbon Construction creates spine consistency for greater accuracy, exceptional reliability and repeat performance.

Carbon crossbow bolts fletched with 2� Bohning Blazer Vanes and equipped with green Lumenok lighted nocks. Available in 20� (338 gr.) and 22� (345 gr.) Weights do not include points.

100 percent carbon crossbow bolt with Lumenok lighted nocks installed. Bolts are squared on the nock end to ensure proper functioning of the lighted nock. Factory fletched with 2" Blazer vanes. Length: 20". Includes brass inserts. Weight: 338 gr. (without point).

100 percent carbon crossbow bolt with Lumenok lighted nocks installed. Bolts are squared on the nock end to ensure proper functioning of the lighted nock. Factory fletched with 2" Blazer vanes. Length: 22". Includes brass inserts.

Carbon crossbow bolts fletched with 2" Bohning Blazer Vanes and equipped with green Lumenok lighted nocks. Available in 20� (338 gr.) and 22� (345 gr.) Weights do not include points.