Screw in 19/64 points.

Easton’s 4mm Aluminum Half-Out Aluminum inserts enable the use of common 8-32 thread broadheads in 4mm Full Metal Jacket and 4mm Carbon Injexion shafts. Precision machined from aluminum, this half-out delivers high strength-to-weight ratio. The package contains one dozen (12) 35 grain half-out inserts.

Easton’s 4mm Aluminum Half-Out Aluminum inserts enable the use of common 8-32 thread broadheads in 4mm Full Metal Jacket and 4mm Carbon Injexion shafts. Precision machined from aluminum, this half-out delivers high strength-to-weight ratio. The package contains one dozen (12) 35 grain half-out inserts.

Super-strong titanium half-out system that solves the desire of bowhunters who want to use regular 8-32 broad heads in micro diameter arrows. Precision machined from TI–6 series high-strength titanium for high strength-to-weight ratio, providing a better tune with your preferred arrow shaft than overly heavy steel half-outs, and superior durability over aluminum half-outs. Features Easton’s HP high-precision alignment technology for unsurpassed broadhead alignment and concentricity.

The AXIS 4MM Long Range is engineered with a specific 100% carbon-fiber layup for increased velocity. Includes Easton’s new Aluminum point outsert to boost both strength and front-of-center accuracy at long range.

The AXIS 4MM Long Range is engineered with a specific 100% carbon-fiber layup for increased velocity. Includes Easton’s new Aluminum point outsert to boost both strength and front-of-center accuracy at long range.

The AXIS 4MM Long Range is engineered with a specific 100% carbon-fiber layup for increased velocity.

The AXIS 4MM Long Range is engineered with a specific 100% carbon-fiber layup for increased velocity.

The AXIS 4MM Long Range is engineered with a specific 100% carbon-fiber layup for increased velocity.

FMJ starts with an advanced carbon core foundation for lightweight strength.  A full metal jacket adds kinetic energy, enhances accuracy, and pulls easier from targets.  The combination provides the deepest penetration and more pass-through impacts for quicker kills and heavier blood trails.

FMJ starts with an advanced carbon core foundation for lightweight strength.  A full metal jacket adds kinetic energy, enhances accuracy, and pulls easier from targets.  The combination provides the deepest penetration and more pass-through impacts for quicker kills and heavier blood trails.

FMJ starts with an advanced carbon core foundation for lightweight strength.  A full metal jacket adds kinetic energy, enhances accuracy, and pulls easier from targets.  The combination provides the deepest penetration and more pass-through impacts for quicker kills and heavier blood trails.

FMJ starts with an advanced carbon core foundation for lightweight strength.  A full metal jacket adds kinetic energy, enhances accuracy, and pulls easier from targets.

FMJ starts with an advanced carbon core foundation for lightweight strength.  A full metal jacket adds kinetic energy, enhances accuracy, and pulls easier from targets.

Precision molded press fit nock. Fits "G" UNI bushings and any other shafts that accept "G" nocks.

Precision molded press fit nock. Fits "G" UNI bushings and any other shafts that accept "G" nocks.

Precision molded press fit nock. Fits "G" UNI bushings and any other shafts that accept "G" nocks.

Precision molded press fit nock. Fits "G" UNI bushings and any other shafts that accept "G" nocks.

Precision molded press fit nock. Fits "G" UNI bushings and any other shafts that accept "G" nocks.

Precision molded press fit nock. Fits "G" UNI bushings and any other shafts that accept "G" nocks.

.166" inside diameter glue in target point

.166" inside diameter glue in target point

Replacement nock for Easton arrow shafts that use Deep Six components.

Replacement nock for Easton arrow shafts that use Deep Six components.

Replacement nock for Easton arrow shafts that use Deep Six components.

For use with Easton 4MM arrows shafts. Break-off shank will fit arrows with .166" ID.

Stainless steel adjustable weight glue in target points for Easton carbon One shafts.

Pin bushing for Easton Carbon One shafts (Sizes 550-730).

Glue-in application ensures point stays in place even in tough target faces

Easton's 5mm Half-Out Insert is convenient insert option. Compatible with any Easton 5mm arrow shafts. Available in aluminum or stainless steel.

Easton's 5mm Half-Out Insert is convenient insert option. Compatible with any Easton 5mm arrow shafts. Available in aluminum or stainless steel.

Small diameter shaft made to deliver performance and penetration. Constructed of high strength carbon-composite fibers. Straightness tolerance of +-.003�. Available in sizes 700 (6.1 GPI), 600 (7.2 GPI), 500 (8.1), 400 (9.0 GPI), 340 (9.5 GPI), 300 (10.7 GPI), and 260 (11.5 GPI). Includes X Nocks

Small diameter shaft made to deliver performance and penetration. Constructed of high strength carbon-composite fibers. Straightness tolerance of +-.003�. Available in sizes 700 (6.1 GPI), 600 (7.2 GPI), 500 (8.1), 400 (9.0 GPI), 340 (9.5 GPI), 300 (10.7 GPI), and 260 (11.5 GPI). Includes X Nocks

High penetration 5mm Axis SPT carbon arrows for shorter draw length and lower poundage bows. The 5mm micro diameter Axis SPT hunting arrows are compatible with all Axis accessory components. Includes X nocks and aluminum half out 8-32 inserts.

High penetration 5mm Axis SPT carbon arrows for shorter draw length and lower poundage bows. The 5mm micro diameter Axis SPT hunting arrows are compatible with all Axis accessory components. Includes X nocks and aluminum half out 8-32 inserts.

High penetration 5mm Axis SPT carbon arrows for shorter draw length and lower poundage bows. The 5mm micro diameter Axis SPT hunting arrows are compatible with all Axis accessory components. Includes X nocks and HIT 8-32 inserts. Straightness: .006�. Available sizes: 500 (8.1 gpi.) 600 (7.2 gpi.) and 700 (6.1 gpi.).

5MM Axis Sport carbon arrows for shorter draw/lower poundage bows. Easton’s Axis Sport (SPT) is the newest member of the legendary AXIS lineup offering improved field performance for bowhunters with shorter draws and/or lighter-poundage setups.

High penetration 5mm Axis SPT carbon arrows for shorter draw length and lower poundage bows. The 5mm micro diameter Axis SPT hunting arrows are compatible with all Axis accessory components. Includes X nocks and aluminum half out 8-32 inserts. Straightness: .006�. Available sizes: 500 (8.1 gpi.) 600 (7.2 gpi.) and 700 (6.1 gpi.).

The 5mm Autumn Orange FMJ is a fresh take on an old favorite, featuring Easton exclusive FMJ arrow technology and finished with the classic Easton Autumn Orange anodize, this limited edition offering gives archers a modern arrow with throwback nostalgia to the arrows they may have put in their first quiver.

The 5mm Autumn Orange FMJ is a fresh take on an old favorite, featuring Easton exclusive FMJ arrow technology and finished with the classic Easton Autumn Orange anodize, this limited edition offering gives archers a modern arrow with throwback nostalgia to the arrows they may have put in their first quiver.

The 5mm Autumn Orange FMJ is a fresh take on an old favorite, featuring Easton exclusive FMJ arrow technology and finished with the classic Easton Autumn Orange anodize, this limited edition offering gives archers a modern arrow with throwback nostalgia to the arrows they may have put in their first quiver.

The 5mm Autumn Orange FMJ is a fresh take on an old favorite, featuring Easton exclusive FMJ arrow technology and finished with the classic Easton Autumn Orange anodize, this limited edition offering gives archers a modern arrow with throwback nostalgia to the arrows they may have put in their first quiver.

More penetration, add kinetic punch for thick hide & bone with a full metal jacket.

Made with a tough carbon core and durable alloy jacket for increased strength and bone crushing performance. Straightness tolerance of +-.002�. Available in sizes 500 (9.1 GPI), 400 (10.2 GPI), 340 (11.3 GPI), and 300 (12.0 GPI). Includes X Nocks and HIT inserts.

Made with a tough carbon core and durable alloy jacket for increased strength and bone crushing performance. Straightness tolerance of +-.002�. Available in sizes 500 (9.1 GPI), 400 (10.2 GPI), 340 (11.3 GPI), and 300 (12.0 GPI). Includes X Nocks and HIT inserts.

Aluminum insert for use in Easton and Beman X diameter carbon arrows.

Precision molded, press fit indexable nocks for Axis and other "X" sized arrow shafts.

Precision molded, press fit indexable nocks for Axis and other "X" sized arrow shafts.

The 5mm X Nock is compatible with the the Inspire carbon arrow ( 570 and 630 spines only) and Easton’s 5mm hunting arrows. Weight: 9 grains.

Precision molded, press fit indexable nocks for Axis and other "X" sized arrow shafts.

Zinc glue in target point for Inspire shafts. Fits shaft sizes 570 and 630.

The 6.5 uses a proprietary Acu-Carbon Uniform Spine process. Acu-Carbon is continuous fed single die manufacturing method that results in the most reliable tolerance and eliminates the need for the spine alignment and weight sorting.

The 6.5 uses a proprietary Acu-Carbon Uniform Spine process. Acu-Carbon is continuous fed single die manufacturing method that results in the most reliable tolerance and eliminates the need for the spine alignment and weight sorting.

The 6.5 uses a proprietary Acu-Carbon Uniform Spine process. Acu-Carbon is continuous fed single die manufacturing method that results in the most reliable tolerance and eliminates the need for the spine alignment and weight sorting.