Shop Accessories

• Arrow fletching tool designed for archers and bowhunters that want simplicity and accuracy at a reasonable cost.
• Fletch III features a fixed 1?degree offset and fits arrows .240" to .370" in diameter (ACC diameter to 25 aluminum diameter).
• For example, the clamp is made of a highly rigid material that glue will not stick to because it contains teflon and silicon.
• The X-Stand/Arrow holder is designed for different sizes of arrow shafts.
• It is labeled with an "L" (large diameter) and an "S" (small diameter) to indicate which side of the stand to use.

• Quickly removes arrow fletching and glue residue.
• Reversible blade for right and left hand users.
• Works great on all types of arrow shafts.
• (2) replaceable blades included.

• No mounting necessary, hand-held jig.
• Enables you to fletch 1 dozen arrows in 30 minutes or less.
• Accepts most plastic vanes.
• Applies all 3 vanes at one time.
• Fletches with cock fletch out.

• Excellent for holding insert securely while hot melt or epoxy is applied.
• Helps prevent glue from getting into the insert opening.
• Approximately 5" long to keep hand away from heat.

For Bitzenberger Dial–O–Fletchers.

• Fletch arrows right helical. (Recommended for compound shooters and overdraws) 
• Graduated scale on side of clamps accurately spaces feather or vane from nock Ã????????120Ã???????Ã??????Ã?????Ã????Ã???Ã??Ã?°, 75Ã???????Ã??????Ã?????Ã????Ã???Ã??Ã?° x 150Ã???????Ã??????Ã?????Ã????Ã???Ã??Ã?°, 90Ã???????Ã??????Ã?????Ã????Ã???Ã??Ã?° or 60Ã???????Ã??????Ã?????Ã????Ã???Ã??Ã?°.
• Includes right nock receiver and right helical clamp.

To be used with Blazer Helix Fletching Jig – Item #1344. (discontinued - non-returnable)

• Safely strips vanes, glue and wraps from arrow shafts.
• A pre-formed channel provides the safest cutting angle.
• An easy grip handle and contoured, surgical steel blade makes stripping your shaft a breeze.
• Safe for use on all shafts.

Extra Pro Series Clamps

Constructed of aluminum and glass filled nylon for individual or commercial use. This fletcher will do 3 fletch 120°, 4 fletch 75°x105°, 60°x120°, 90°x90°, 5 fletch; 6 fletch 60° and any other combination. Will also fletch cock fletch up, down, out or any other angle desired. The indexable upper shaft support is designed to hold each size shaft from 14/64" (.218") to 25/64" (.391") perfectly centered through the use of exact sized and numbered slots. The shafts cannot move while applying the fletching. Added features include hardened indexing contact points for non-wearing accuracy, no ball bearing or disks to fool with and 3" x 5" data index cards are available to record information for quick setup at a later date.

6-degree (discontinued - non-returnable)

• The only fletching tool designed for the carbon arrow market.
• This tool will fit all shafts from the smallest carbon up to a 2018 aluminum.
• It has a patented design to insure the exact 1/3 alignment of the fletching.

• Removes feathers or vanes in seconds and is simple to use.
• Also scrapes glue residue from shaft nock taper.

• Display your crossbow or bow with pride.
• Store and display your favorite crossbow while making it stylish and attractive.
• Fits both crossbows and compound bows.
• Matte Black finish.
• Hardware not included.

• For Bitzenberger fletcher.
• Right Helical.

Fits Grayling or Bitzenberger fletchers.

Fits Grayling or Bitzenberger fletchers.

• Zips off either feathers or plastic vanes in seconds.
• Simple to use.
• Tool steel blade is replaceable.

• These Glue Bottle Tips are the solution for fletching arrows with a perfect bead of glue every time.
• Simply screw onto your glue bottle and start to fletch.
• Works with all standard types of glue.

• Fully adjustable fletcher is constructed of glass-filled nylon with adjustable nock holder set for 3 fletch arrows.
• Can be easily converted with additional 4 fletch plates.
• Clamps fit snugly to shaft to allow for a clean line every time.
• Heavy duty steel magnet for secure positioning.

• Fully adjustable fletcher is constructed of glass-filled nylon with adjustable nock holder set for 3 fletch arrows.
• Can be easily converted with additional 4 fletch plates.
• Clamps fit snugly to shaft to allow for a clean line every time.
• Heavy duty steel magnet for secure positioning.

Replacement finger caps for Last Chance presses.

• Allows bow X and Y axis micro-adjustments by a simple turn of one knob for each axis.
• Features full 360° rotation of the bow.

• High capacity, high accuracy digital scale.
• Arrow / accessory holder included.
• Weighs in grains only.
• 3086 grain max x 0.2 grain accuracy.
• 4-3/4" x 3-1/4" x 15/16".
• Operates on (2) AAA batteries (included).